Construction
The housing of the IB66 is constructed of rigid extruded aluminum. End caps are aluminum and are welded to the housing. Before being painted the seam is sanded and puttied to create a seamless end cap appearance. All internal fasteners and aligners are concealed inside of the housing. For patterns aluminum connectors that are welded, sanded and puttied are provided in 90 degree, “T” and “XT” configurations.
Finish
Standard housing finish is powder coat matte white. Other powder coat finishes are available as an option. End caps and connectors are finished the same as the housing on all painted parts. Internal components are finished in gloss white.
Shielding
The IB66 is available with a parabolic louver, acrylic lens, white straight blade baffle, or a 1/2" x 1/2" small cell louver. Parabolic louvers are constructed of anodized aluminum with either a specular or semi-specular finish. They lift and shift for easy lamp access. A variety of lenses are available and are lay-in type. The white straight blade baffle is constructed of steel and finished with a gloss white finish and also is a lay-in type. 1/2" x 1/2" louvers are available in aluminum or acrylic. The acrylic louvers are available in white, gold and silver.
Mounting
The IB66 is designed to be installed with cables or stems, or mounted to the wall with a bracket. Precise mounting dimensions are available from the TID installation sheet. When corners are used the fixtures can be suspended from the corners. When patterns or rows are being used it is recommended that the factory be provided with a layout diagram.
Labels and Electrical
All fixtures bear appropriate UL labels. Fixtures are prewired with electronic ballasts. Available in 120, 277, or 347 volt.
