Alera Lighting

IDC

INDECON Overview

Indecon is an innovative product offering a choice of several different configurations at an amazingly affordable cost. Clever design features maintain the product's versatility while providing attractive and aesthetically pleasing lines.

INDECON FEATURES

A gently pointed shape enhances this curved profile
Primarily indirect, Indecon is well-suited to office, education, and health care where uplight is desired as the primary source
T8, T5, or T5HO lamps
Heavy 20-gauge steel construction provides excellent housing rigidity
3-1/8" deep housing is gently angled for visual interest
Solid housing offers 100% indirect light
Perforated housing option allows +/- 5% downlight
All perforated housing provides a continuous glow across the width of the unit for approximately 10% downlight
Fixed 18" (FCM18) or optional Adjustable 48" (CM48) aircraft cable suspension mountings available
Finger tab connections for quick and easy alignment
Modular mounting points for predictable hanging locations
UL Listed 1598

INDECON Technical

SPECIFICATION INFORMATION

Construction

The Indecon series is constructed of heavy 20-gauge steel with a 9-9/16" x 3-1/8" profile. Fixtures are available with one, two, or three T8, T5, or T5HO lamps. A unique angling method on the one lamp unit and on the middle lamp of the three lamp unit minimizes the length of the fixture without affecting the performance or operation of the unit. This lamp positioning ensures that all fixtures are made in four foot increments. The exact shape of the housing is maintained by the use of an inner structural plate at each socket location. The plate is tabbed and welded into the housing, ensuring housing tolerances are consistent. Aligner fingers are standard on the plate enabling fixtures to be attached together in straight continuous rows without misalignment between fixtures. End caps are made of 18-gauge steel construction and attach with nuts and bolts. The reflector is constructed of specular anodized aluminum for wide distribution with maximum efficiency.

Finish

Housing and all painted parts are treated with a multi-stage phosphate bonding process prior to finish. Parts are then finished with a matte white RAL powder coat for consistent coverage and maximum durability.

Mounting

The Indecon is designed for ceiling suspension and is provided with an aircraft cable suspension mechanism. The cable has a total vertical adjustment of 1-1/4". A barrel at the end of the cable screws onto a standard 1/4 20 bolt brought down from the ceiling. Cover plates are provided to shield the ceiling cutout. A straight or optional coil cord is provided for feed locations. A feed canopy is provided for each feed location. All fixtures are suspended at 48" increments and must be supported at each fixture housing end.

Labels and Electrical

All fixtures bear appropriate UL labels. Fixtures are prewired with small case electronic ballasts and are available in 120V, 277V, or 347V. All fixtures are wired for single circuit operation but additional circuits can be supplied as an option.
CROSS SECTIONS

IDC-1T8

IDC-2T8

IDC-3T8

IDC-2T8-AP

IDC-1T5

IDC-2T5

IDC-3T5
BOTTOM VIEW

Solid Bottom

Perforated Bottom

All Perforated Bottom
INSTALLATION

Fixture Connections

Suspension Attachment